BC 2035
- Made in USA
- Sold individually
- Lightweight, marine grade stainless steel buckle
- 36 in (91.4 cm) length of 2 in webbing with 7,000 lb tensile strength
- Weight: 11 oz (311 g)
BCD's, Backplate & Wings, Harnesses and Accessories; we've got it all! From Atomic to ScubaPro, our professional staff at Signature Scuba will ensure proper fitting, comfort and selection with you in store and also help you right here on the website! Our knowledge and experience will help guide you through your selection of this excellent piece of equipment used for scuba diving!
MORE CHOICES AVAILABLE
Part# OM20002
The Performance Mono Wing is a donut - style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ backpack, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.
FEATURES:
- Donut style configuration
- Inflator located left side
- Power inflator hose included
- Interior z zipper backing
- Dump valve left side
- Light weight ideal for traveling diver
- 1000 denier nylon outer bag
- Interior urethane backing protects against abrasions and punctures
- Inner Bladder Polyurethane material, ultrasonically welded fittings and seams
- Low Pressure (LP) inflation hose included
- Weighs: 2.6 lbs
MORE CHOICES AVAILABLE
Part# OM20006
The Performance Mono Wing is a donut style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ backpack, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.
FEATURES:
- Donut style configuration
- Inflator located left side
- Power inflator hose included
- Interior zipper backing
- Dump valve left side
- Light weight ideal for traveling diver
- 1000 denier nylon outer bag
- Interior urethane backing protects against abrasions and punctures
- Inner Bladder Polyurethane material, ultrasonically welded fittings and seams
- Low Pressure (LP) inflation hose included
- Weighs: 2.6 lbs
MORE CHOICES AVAILABLE
Part# OM20015
The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks.
Some variations will be on custom order with 3-4 month wait.
FEATURES:
- Donut style configuration
- Inflator hose top Center
- Power inflator hose included
- Interior zipper backing
- Dump valve lower left
- 1000 denier nylon outer bag
- Interior urethane backing protects against abrasions and punctures
- Inner bladder polyurethane material, ultrasonically welded fittings and seams
- Low Pressure (LP) inflation hose included
MORE CHOICES AVAILABLE
Part# 99-1000-SM
Atomic BC1
We wanted a World-Class BC…so we designed one. The BC1 wreaks havoc on traditional BC design. Every detail was reexamined. Every material and component was rethought. The BC1 is the TOUGHEST BC in the world. For divers who want only the BEST. Just like every new Atomic Aquatics product, the BC1 is designed to redefine and leads its category.
Please Note: Inflator assembly sold separately
Part# BC1090-S/S
Save time switching between singles and doubles.
Our Single Tank Adapter is constructed of marine grade 304 stainless steel and fits squarely in the opening of our Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, the STA is the answer. It is also a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Includes two rubber non-slip cam strap pads and all hardware required to mount STA to a backplate.
Note: STA does not include cam straps
- Dimensions: 13 x 3 3/8 in (33 x 8.5 cm)
- Weight: 13 oz (.37 kg)
Part# OM20313
Forged out of stainless steal primarily used to connect a metal backplate to a multitude of our items such as an IQ backpack, all of our BC wings, our back pads, and Single Tank Adapters(STA) and more . Book Screws can also be used to mount inflation systems to the back plate. They fit a standard 3/8 hole on back plates. They are sold in singles and come in 3 sizes.
The 10mm is generally for a single grommet attached to the back plate. Example would be attaching a back pad to the back plate. The 16mm is generally for attaching two grommet items and the back plate. Example would be attaching a soft STA, wing, and the back plate. The 20mm is generally for attaching three grommet items and the back plate. Example would be attaching a soft STA, wing, IQ pack and the back plate
Part# OM20315
Forged out of stainless steal primarily used to connect a metal backplate to a multitude of our items such as an IQ backpack, all of our BC wings, our back pads, and Single Tank Adapters(STA) and more . Book Screws can also be used to mount inflation systems to the back plate. They fit a standard 3/8 hole on back plates. They are sold in singles and come in 3 sizes.
The 10mm is generally for a single grommet attached to the back plate. Example would be attaching a back pad to the back plate. The 16mm is generally for attaching two grommet items and the back plate. Example would be attaching a soft STA, wing, and the back plate. The 20mm is generally for attaching three grommet items and the back plate. Example would be attaching a soft STA, wing, IQ pack and the back plate
Part# BC2035
Dive Rite cam straps are available in several options. Whatever your application is, we have a cam strap that will work. All cam straps are sold individually, and all are made in the USA.
The stainless steel cam strap with roller buckle (BC 2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle. 36-inch (91.4 cm) webbing length is suitable for cylinders from 6.9-inches (17.5 cm) to 8-inches (20.3 cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.
The low-profile, 1.5-inch cam strap (BC 2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low-profile marine grade stainless steel roller cam buckle, the 1.5-inch wide strap is 36-inches (91.4 cm) long and is user adjustable to fit cylinders from 5-inches (12.7 cm) in diameter up to 8-inches (20.3 cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the buckle from accidentally coming open.
The 2-inch cam strap is also available with a plastic buckle (BC 2032). The plastic buckle is a popular option for applications where trimming every ounce possible from gear is necessary. The plastic buckle cam strap includes a rubber non-slip pad to prevent the cylinder from shifting once the cam strap has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open.
2-inch stainless steel buckle cam straps are also available in a double-long version, with a 52-inch (132 cm) length (BC 2035-DOUBLE). Note: Double length cam strap will include 2 rubber non-slip pads.
MORE CHOICES AVAILABLE
Part# BC5500-E-16
The BC 5500 CCR XT adjustable lift wing is designed for the O2ptima eCCR or any rebreather diver looking for maximum durability, versatile options, and the ability to streamline their hoses and wing for in-water efficiency.
Using a SuperFabric® brand technology XT material to create an armor-clad outer shell that is impervious to damaging pinches and cuts, a 1680 ballistic nylon diver’s side panel, and a heavy-duty, 210 denier nylon laminated inner bladder, the BC 5500 CCR XT will hold up under all the rigors of diving.
Offering 40 pounds (18.1 kg) of lift with a dual bladder option (BC 5500-DUAL), the BC 5500 CCR XT is versatile enough for any rebreather diving configuration and is designed for use with our TransPac, TransPlate, or metal backplates.
With an offset inflator hose, lying just to the outside of the chest-mounted counterlungs, and an open midsection, hose positioning couldn’t be more streamlined. The open midsection allows rebreather hoses to pass through the middle of the wing, freeing up space behind the diver’s head and keeping airflow from being compressed at the top of the wing. No longer will hoses press down on the wing and restrict airflow.
A 16-inch elbow inflator hose and a 22-inch low-pressure inflation hose come standard but if needed, other hose lengths are available upon request.
To allow a diver to set their trim more effectively, the BC 5500 CCR XT has two sets of marine-grade 316 stainless steel grommet mounting holes, which are used to attach the wing to a harness in two different positions. So, no matter what harness system or what rebreather is used, the wing can be positioned to maximize the diver’s trim in the water.
A Gusset Control System (GCS) cord is also provided (optional for use) that can be used to further streamline the wing such as when carrying small bailout bottles. The GCS is not like a bungee wing because it does not restrict airflow; instead the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.
The BC 5500 CCR XT is backed by our Worry-Free Lifetime Guarantee and is made exclusively in the USA.
- Made in USA
- Outer Bag Material: SuperFabric brand technology for maximum durability against the harshest elements
- Diver’s Side Panel Material: 1680 ballistic nylon
- Inner Bladder Material: Heavy-duty 210 denier nylon laminated to withstand and resist pinches and punctures
- Lift: 40 lbs (18.1 kg). Optional back-up bladder available
- Gusset Control System: Stretch cord that can be used to further streamline the wing if desired without restricting airflow
- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
- 16 in elbow inflator and a 22 in LP inflation hose come standard with other hose lengths available upon request
- Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach the wing to a harness and set diver’s trim
- Compatibility: Designed for use with the TransPac, TransPlate, or metal backplates
- Approximate dimensions not inflated: 22 in tall x 21 in wide (55.8 cm x 53.3 cm)
- Weight: 3 lbs (1.4 kg)
MORE CHOICES AVAILABLE
Part# BC2030-E-16-BLACK
The OG doubles wing.
The Dive Rite Classic Wing has stood the test of time as the first aircell designed specifically for use with large double cylinders. With 55 pounds of lift, the Classic Wing was designed to carry double steel 104s with multiple stage bottles and other accessories. Using a horseshoe design, divers can target lift where it’s needed to balance out their rig and stay in trim.
Compared to the original “Doubles Wing” released in 1985, today’s Classic version has an enhanced construction using a premium 1000 denier ballistic nylon outerbag and a heavy duty 210 nylon laminated inner bladder. The solid center panel features two sets of 316 stainless steel grommets for mounting so a diver can tweak the wing position to adjust trim. A piece of 2-inch nylon webbing runs down the center of the Classic wing to reinforce the grommets. The Classic wing is available in all black, black with red trim, and black with blue trim.
The top outlet is centered so it’s nestled between the cylinders under the isolation valve and clear of hose routing. The wing comes standard with a 16-inch corrugated hose (12-inch available by request) with elbow attachment, a robust power inflator, and a 22-inch low pressure inflator hose. The pull dump over pressure valve is in the traditional lower left corner of the wing. Welded urethane bladder flanges allow easy, tool free removal and replacement of corrugated hoses and over pressurization valves. Appealing to a minimalist diving philosophy, the Classic wing is free of any bungee, tabs, or excess clutter.
Like all of Dive Rite’s aircells since 1985, the Classic wing is proudly designed and produced in the USA.
- Made in USA
- Lift: 55 lbs (25 kg)
- Outerbag Material: 1000 Denier Ballistic Nylon
- Colors: All Black, Black with Red trim, and Black with Blue trim
- Inner Bladder Material: 210 Denier Laminated Nylon
- 16 or 12 in elbow
- 22 in LP inflator hose
- Mounting: Two sets of marine-grade 316 stainless steel grommet holes reinforced by 2 in nylon webbing
- Welded urethane bladder flanges
- Weight: 2.2 lbs (1 kg)
MORE CHOICES AVAILABLE
Part# BC5400-E-12
The Classic XT Wing (model BC 5400) is the workhorse of our series of wings. With a history dating back to our early days, the Classic Wing has been dived and proven many times over, leading the way for divers to penetrate deep into caves, explore shipwrecks, or cruise comfortably deep on an ocean ledge.
Designed solely for double tanks and with the option of a single or dual bladder, the Classic XT provides 60 pounds (27.2 kg) of lift, which can accommodate two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles.
Supporting heavy doubles and stage bottles is one thing, but being able to properly balance and stabilize that amount of heavy gear for proper trim while swimming is where the Classic XT really shines. The donut-shape design provides excellent stability and control while diving by keeping a volume of inflation on the top, sides, and bottom. This, along with an optional integrated Gusset Control System (GCS) that reduces “taco” effect, promotes effective streamlining and puts buoyancy where it is most needed (throughout the torso supporting the weight of the tanks) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its’ full capacity.
Designed to handle the extremes, the Classic XT is built using our rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, along with a 1680 ballistic nylon diver’s side panel. Inside the SuperFabric® outer shell, a heavy-duty, 210 denier nylon laminated bladder enhances the ruggedness and superior performance of the Classic XT.
The Classic XT comes equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump) along with an appropriate low-pressure inflation hose. It also has two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness and set of tanks.
As a part of our modular BCD system, the Classic XT can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.
The Classic XT is backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.
- Made in USA
- Outer Bag: SuperFabric® brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures)
- Inner Bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
- Wing Gusset Control system for streamlining
- Lift: 60 lbs (27.2 kg)
- Cylinder Accommodation: Two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles
- 15, 22, or 27 in (38, 55.8, or 68.5 cm) LP inflator hose
- 16 in rapid exhaust (pull-dump) or 12 or 16 in elbow
- Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
- Urethane Flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
- Weight: 3 lbs (1.36 kg)
- Size: 24 in tall x 26 in wide (60.9 cm x 66 cm)
MORE CHOICES AVAILABLE
Part# OM20115
Deep Ocean Wings include the Retraction Band System, which is designed to keep the wing folded behind the diver’s shoulders, reducing drag and the chance of entanglement. Works with single or twin cylinders.
FEATURES:
- Interior retraction band system
- Lift capacity: 48-60 lbs (21.7-27 kg)
- New style configuration
- 16" Inflator hose on the left shoulder
- Power inflator hose included
- Interior zipper backing
- Dump valve on the lower left
- Dump valve on the upper right
- Stainless steel grommets
- 1000 denier nylon outer bag
- Interior urethane backing protects against abrasions and punctures
- Inner bladder polyurethane material, ultrasonically welded fittings and seams
- Low pressure (LP) inflation hose included
- Double stitched seams to prevent fraying
- Donut style configuration for optimum air movement in any position
Part# BC1037
Comfort in all the right places.
The Backplate Comfort Pad’s high-tech design consists of molded foam contoured to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using hook-and-loop straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. Fits any standard backplate and harness.
- Made in USA
- Constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance
- Quick-dry foam padding with an open-cell porous design allows the pad to release water and dry in a hurry
- 10.5 x 16 in high (27 x 41 cm)
- 6 oz (170 g)
Part# 208.8001.050
DOUBLE DOWN ON EXPLORATION.
The DT System is minimal and simple, and designed for the rigorous demands of the discerning doubles diver. Made tough, it comes with all of the components for your backplate and wing kit in one, pre-assembled from the factory.
The foundation for the DT system starts with our new stainless steel backplate 2.0, with geometry and material choices tailored to your style of diving. We then added our continuous-weave solo harness. It has no buckles that can fail, and no extra parts that you don’t need.
Rounding out the DT system is our new DT50 doubles wing and, with a radical redesign, it’s ideal for various sized double cylinders and colder waters. The DT50 also promotes greater lift towards the divers hips for better horizontal trim.
Lastly, it includes our new Backplate Backpad 2.0, which is designed to pivot out of the way when installing your kit on a set of doubles. Be sure to add a set of cam bands for the occasional single tank dive.
Details
- A minimal and simple Hollis System
- Designed for the Doubles Diver
- Ideal for large double cylinders and cold water
- Solo harness ultra streamlined for simplicity
- Backplate Backpad 2.0 offers padding, lumbar support
Wing Specs
- DT50 – 50 lbs / 23 kg lift
- DT45 Dual – 45lb lift / 20 kg lift
- Welded flange and one piece retainer for servicing without the need for tools
- HD Laminated 1680D Cordura outer shell
- 420 nylon internal bladder
- Central elbow to avoid tank valve/regulator interference
- Lower left pull relief valve
- Cam band slots
Backplate 2.0
- STAINLESS BACKPLATE 2.0
- AISI 304 Stainless
- 4mm thickness
- Sandblasted finish
- Electropolished & chemically passivated
- Laser cut & CNC bent
- 6.5 lbs / 3 kg
Part# 22.285.510
The Glide is a front-adjustable BCD with special design features to maximize comfort, fit and performance. The Glide comes with a new Y-Fit shoulder design that adapts to the body better, allowing for excellent control and range of motion for arms. The stainless steel triangular ring manages the forces in the Y’s center, balancing pressure over the body and keeping the harness under control, regardless of dive conditions or your position in the water. The lower strap is connected to the backpack where it meets the cummerbund, creating a safe and comfortable link. The dump system includes three new-generation valves that allow you to deflate the wraparound bladder in any swimming position.
- Wraparound air bladder retains its cradle-like shape even when fully inflated.
- New Y-Fit shoulders with a triangular stainless steel ring balance the pressure on the body to maximize fit and comfort.
- Soft neoprene neck and padded backpack optimize comfort.
- Adjustable cummerbund compensates for suit compression, ensuring a snug fit at varying depths.
- Super Cinch tank buckle system locks the tank in solid for maximum stability at depth.
- Quick-release integrated weight pouches feature a high-security flat-buckle system.
- Two rear trim pouches allow you to achieve a well-balanced swimming position.
- Two large zippered pockets provide lots of cargo-carrying capability, plus are fitted with metal grommets for attaching a knife.
- Four large pre-bent stainless steel D-rings, along with two smaller stainless D-rings, provide lots of clip-on points for additional gear.
Part# BC1063
Old-school, no frills Hogarthian harness.
The Basic Harness is a clean, streamlined harness for use with hard backplates. Two-inch (50 mm) nylon webbing provides strength, yet is soft and won’t dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his or her body. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Includes marine-grade stainless steel hardware.
Note: Does not include backplate.
- Made in USA
- Eleven feet of two-inch (50 mm) nylon webbing is rated at 7,000 lbs breaking strength and includes a stainless steel grommet at the midpoint for access to upper bolt hole
- Marine Grade 316 stainless steel hardware is used throughout including: (2) bent, shoulder D-rings, (2) waist D-rings (1) grommet and (1) stainless steel belt buckle.
- 1lb, 2oz (0.53 kg)
Part# BC1080
Simple, yet comfortable.
A webbing harness designed for hard backplates that provides comfort alongside streamlining. Swivel points on the shoulder straps ensure a perfect fit, which is especially important for women, as well as men with broad shoulders. A chest strap holds the harness securely in place. Two-inch (50mm) nylon webbing provides strength, yet is soft and won’t dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his or her body. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Includes marine-grade stainless steel hardware.
Quick Release model also available (BC1080Q).
Note: Backplate not included.
- Made in USA
- Six feet of two-inch (50 mm) nylon webbing forms the upper harness and is rated at 7,000 lbs breaking strength. Includes a stainless steel grommet at the midpoint for access to upper bolt hole
- Three feet of two-inch (50 mm) nylon webbing forms the waist portion of the harness and is rated at 7,000 lbs breaking strength
- Marine Grade 316 stainless steel hardware is used throughout including: (2) bent shoulder D-rings, (2) waist D-rings and (1) stainless steel belt buckle
- One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin® 1-inch quick release buckle are used for a chest strap
- 1lb, 8oz (0.70 kg)
Part# HOG0522
Harness Small Quick Drop Weight Pocket Pair
Part# 21.746.005
- Attaches to multi-mount matrix points on your HYDROS PRO BCD.
- Deploys quickly when needed, rolls up out the way when not needed.
- Ideal for storing instructor slates, dive lights, marker buoys, spare masks or compact cameras.
- Includes the pocket, the accessory mount plate, and two stainless steel screws.
Part# 21.746.002
- Attaches to the multi-mount matrix points on the BCD.
- Includes the mounting plate, mini D-rings and two stainless steel screws.
- Best used with bungee cord sets, carabiners and magnetic quick clips.
